Storage & Handling

Dry filament wins for virtually every print you care about, and the single strongest reason is consistency: moisture-contaminated filament produces unpredictable extrusion, weak layer adhesion, and surface defects that no slicer setting can fully compensate for. If you are staring at a spool and wondering whether it is the source of your print problems, the…

Most print-quality problems that get blamed on a bad nozzle or slicer settings actually trace back to wet filament. The fix is straightforward: store every spool in a sealed container with fresh desiccant, and dry filament before you print if it has been sitting out for more than a few days in average humidity. The…